METAL EMBELLISHMENTS -PAINTED ENAMELS

Post 501  by Gautam Shah

.

Surface finishing or decorating with a foreign material is a very ancient technology. Metals have been embellished by several techniques. Metals have been coated by metal plating, surface alloying and deposition. Metals have been inlayed with metals, precious stones and objects.

Jingdezhen covered bowl, China, Qing dynasty, c. 1800-1835, Glazed Porcelain, Enamels

These include:

Damascening a technique of encrusting gold, silver or copper wires in the finely chased surfaces of iron, steel, or bronze.

Niello is made from black metallic alloy of sulfur with silver, copper, or lead. It is filled in chased or engraved patterns over silver. The surface is heated for the niello to melt. On polishing the surface gets a dual metallic effect.

Granulation is made by soldering or fusing granulated beads of silver or gold to effect a bloom to the surface than of a beaded surface.

Filigree is made by forming a fine network of very thin wires fused selectively and than fixed on a metal surface of an object.

Ajouré is similar to filigree but the fine network is created by cutting or piercing the patterns in the metal. Raised patterns or cut out motifs are also fused onto the surface.

Embellishments with Other Materials were formed using precious stones, exotic substances such as rare woods, metals, ivory, horn, beads, sea shells, jade, and amber, and niello-work, fixed into chased or performed cavities or depressions. Fixing was by wire, metal forming, heat-fusing, thread knitting and knotting.

Inlay works are of many varieties. Pre-formed cavities or depressions are filled in by many different materials such as wood, stones and metals. The fixing is with tight fitting, adhesives, or by hammering a ductile metal.

Gilding is application of metal like silver, gold, silver, palladium, aluminum, and copper alloys, in the form of very thin foils. Gilding by gold or silver foils requires as no adhesives as sufficient electrical charges attract the foil to the base, however for permanent fixing (on exterior use) some form of adhesives are used.

Overlays can be defined as metal sheathing or cladding by metal sheets that are slightly heavier than used for gilding. Overlaying is also done by applying a gold amalgam (gold+mercury) and than removing the mercury with heat.

painted enamel on copper 290x 240mm

Enamelling is a metal embellishment technique wherein a vitreous glaze is heat-fused to create a very long lasting decorative effect of brilliant colours. (Read on > Enamels).

Snuff bottle, northern India, 18th century, gold, gemstones and enamel

An Enamel is a compound of flint or sand, red lead, and soda or potash which forms a glass like material on being melted. Low temperature fusing is easier to manage, but creates a soft glass surface that is prone to cracking. Hard enamels are formed at higher temperature are better lasting, but it is a slightly difficult process.

Miniature of Marie Louise d’Orléans, future Queen of Spain by Jean Petitot le vieux (1607-1691)

Painted Enamels are like miniature oil paintings. These are made on a metal base or plate covered with a layer of an opaque enamel. The opaque or white enamel base is further embellished with ‘glass forming but with colouring materials’, rendered by fine needle painting, spraying, screen printing, spattering, scratching or block printing. Separate firing is required for each of the colours. Artists created portraits and other art subjects on very small metal plates, surpassing richness of larger canvass-based oil paintings. Painted Enamels being very small could be carried anywhere as a personal item of collection or treasure. The colours are permanent and non-yellowing or fading. The painted enamel has remained a craft and is not accepted as medium of art. The painted enamels of China are known as Canton (Guangzhou) enamels. Painted enamels are termed by the Chinese yangci (foreign porcelain).

Coloured enamel embellishments were created over arms, armour, mirrors, bowls, cups, chalices, spoons, and miniature pendants, tableware, wall and ceiling panels, signages, table clocks, and snuffboxes.

‘Mercury’, painted enamel and gilt on copper mirror back

Five main types of enamelling processes are used:

Champlevé (French= raised field) enamels are created by scratching or etching a copper surface, which are than filled-in with pulverized enamel material, fired and polished.

Cloisonné (French= partitioned) has very small partitions or cloisons formed with thin metal strips. The partitions are filled with pulverized enamel and fired.

Basse-Taille (French= low cutting) process is a kind of champlevé, but is applied to silver or gold. Here the depressions are filled with translucent enamel, which allows the substrate or patterns on it to be seen.

Plique-à-jour (French=open braids) enamelling resembles cloisonne, but here the partitions form a separable lattice. The lattice is removed after firing, giving an effect of stained glass. It is exceptionally fragile work.

Encrusted Enamel: Encrusted enamel or enamel en ronde bosse is prepared by spreading of an opaque enamel paste over slightly roughened surfaces of objects such as small figures.

Binding representing the Crucifixion of Christ, Limoges (Limosin, France) champlevé enamel on gilded copper

Advertisements

One thought on “METAL EMBELLISHMENTS -PAINTED ENAMELS

  1. Pingback: LIST of METALS related BLOGS | Interior Design Assist

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s