COATINGS WITH NON POLYMERIC SUBSTANCES

Post 546  by Gautam Shah

.

Modern coating technology aims at two distinct targets, improvements in formulations and the technology of application. The formulations have been multipurpose as well as specific. Coating application methods primarily aim at high speed-pressure deposition of maximum proportion of solids, while minimizing the wastage due to over spray, drips etc. and economic use of VOCs (Volatile Organic Compounds). As a result, many combinations of formulation and application have been devised.

Metal ceramic coating Wikipedia image by Author SlonikkinolS

Coatings, traditionally were made of natural polymeric materials like starch, shellac, amber, cellulose, and rubbers. Man-made polymers have been known since 1832. Coatings of synthetic polymers provide better adherence and protection. Polymeric substances have been used in paints and other means of covering such as extrusion and dispersion. Such coverings (e.g. Teflon coating, PTFE, PFA) have heavier films than paints. Polymer covering materials replaced tin, chrome and cadmium plating in many instances. Polymer coating materials include alkyds, vinyls, acrylics, epoxies and polyurethane.

Polymeric coating as roof treatment Wikipedia image by Author Alexcua

Non-polymeric coatings or coverings are created through following basic routes.

1 Galvanic deposition: A metallic compound migrates from a high potential cathode, to the object, that is an anode. The migration is at molecular level with the formation of an alloy or like substance at the receiving end.

2 Oxidation: An oxygen donor fluid or substance is encouraged or facilitated to migrate and form an oxide coating to protect the substrate.

3 Melt Deposition: Metal, Ceramic or Polymeric substances in the form of particles, flakes, fine grains or foils are sprayed or fixed to the substrate, and are melted or fluidized with the help of heat (thermic, sonar, radiation, friction), before, during or after the deposition. The fluidized material forms not only a coating but integrates itself into the substrate.

Metalized polymer yarn Wikipedia image by Author rexess

These techniques of material application are used in commercial processes known as:

  • Electrostatic coating
  • Electrophoretic Coatings
  • Anodization
  • Electrolysis of organic substances
  • Diffusion Coating
  • Electro-deposition
  • Spark hardening
  • Conversion and Conversion – diffusion coating
  • Chemical Vapour Deposition
  • Electro-less and electrolytic metal deposition
  • Welding as surface coating
  • Printing as coating
  • Air and airless spraying
  • Flame spraying
  • Metal sprayed, polymer, impregnated coatings
  • Detonation coating
  • Arc plasma spraying
  • Electric arc spraying
  • Electric harmonic spraying
  • Vacuum metalization of plastics and metals
  • Sputter deposition
  • Ion plating
  • Ion implantation
  • Microwave radiometry coatings

Electrostatic process based printing-coating Wikipedia image by Author Guruleninn

Air electrostatic processes employ air forces to atomize the liquid material and then charge and deposit these particles using electrostatic forces. Articles to be coated are introduced to a space or chamber which provides negative charged environment. The atomized coating droplet on collision with ionized air picks up the negative charge and as result is attracted to the grounded article (to be coated). In another method the spray gun nozzle has an attachment to charge the coating droplets. In such processes, because of attraction there is no over spray wastage and deposition is very secure. Such processes are readily applicable for coating with suitable electrical properties and for articles that are conductive (metals).

Road Coatings Author English: Cpl. Ryan R. Jackson

For architectural coatings, polymeric formulations rule the scene. As majority of such finishes are based on emulsification with water, requiring negligible-amounts of volatile organic solvents. For wood and metals, modified alkyds that need organic solvents are being replaced with solvent-less formulations like powder-coatings. The products manufacturing at plant level, however are adopting metalizing, surface alloying, ceramic coatings, sputter deposition, Ion plating and Ion implantation sputtering technologies.

.

Advertisements

One thought on “COATINGS WITH NON POLYMERIC SUBSTANCES

  1. Pingback: SURFACE MODIFICATIONS | Interior Design Assist

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s